Flap wheel 9,5 mm (502)
Model:
SKU: 2615050232
Used on materials
20.00 ₾
In Stock
What can you do with it?
Flap wheels are great for finish removal and light material clean up because they are more forgiving than sanding bands. They won’t bite into the material as quickly. They also tend to run a little cooler because of the flaps – so they are less likely to put any burn into the material. Grind and polish flat or contoured surfaces. Most effective when used as a finishing sander after heavier surface sanding and material removal is completed. Comes in fine and coarse grades
How to use?
Flap wheels are most effective when the edge is flat against the work piece, allowing for the most abrasion to take place.
Materials to use on and recommended speed
Aluminium 30-35000 Brass 30-35000 Copper 30-35000 Hardwood 30000 Plastic 10000 Softwood 35000 Steel 35000
Technical Specifications
| Shank diameter | 3,2 mm |
| Working diameter | 28,6 mm |
| Working height | 9,5 mm |
| Accessory length | 50,0 mm |
| Material | Cloth-Reinforced with Aluminum Oxide Abrasive |
| Shape | Wheel |
| Mandrel use | No Mandrel Needed |
| Grit | 80 |
| Width | 30,0 mm |
| Maximum RPM | 35.000 1/min |
| Length | 30,0 |
| Height | 44,0 |
Suitable Dremel devices
Open
- Multi-Tools
- DIY
Multi-Tools
- DREMEL® Lite (7760-15)
- DREMEL® 3000 (3000-15)
- DREMEL® 3000 (3000-1/25 EZ)
- DREMEL® 3000 (3000-2/25)
- DREMEL Stylo+ (2050-15)
- DREMEL® 8240 (8240-5)
- DREMEL® 4250 (4250-3/45)
- DREMEL® 8260 (8260-5/65)
- DREMEL® 8260 (8260-5)
- DREMEL® 8240 (8240-3/45)
- DREMEL® 8240 (8240 Platinum+)
- DREMEL® 4250 (4250 Platinum+ )
- DREMEL® 3000 Limited Edition 2026 (3000-1/25 Promo)
DIY
- DREMEL® 8250 (8250 Platinum+)
- DREMEL® 8250 (8250-5)
- DREMEL® 3200 (3200 1/90)
- DREMEL® 8150 (8150-20)
